Climbing roses come in all sizes, ranging from tall to or more. All of these roses need to be trained to climb, however, as they do not climb naturally. In order to train your roses, you’ll need to tie the canes to a support and keep up with pruning. If you haven’t installed a support or planted your roses yet, it’s critical to choose the right location and position them correctly.
EditSteps
EditTraining Your Roses onto Their Support
- Tie the canes to the support without training the first year. When your rose plant starts to grow canes, or stems, long enough to reach your support, tie each of them to it with strips of a stretchy material, such as pantyhose. Hold each cane against the support naturally and make loose ties with of “give” so that the plant has enough airflow to grow properly.[1]
- Continue tying the canes every during the first year. After tying each cane to your support, tend to the plant as is until it grows another . Once you think the canes have grown about this far from the initial ties, measure the growth with measuring tape to be sure. Then, tie each cane as you did before, loosely to the support without forcing them in any specific direction.[2]
- Continue tying the canes each time they've grown past their most recent tie.
- Train the canes to grow horizontally during the second year. After your rose plant has had at least 1 year to establish itself and begin to grow naturally over the support, select the 4 or 5 most healthy, strong canes on the plant. Use strips of pantyhose to loosely tie these healthiest canes to the support, but this time tie them so that they’re positioned as horizontally as possible across the support.
- As they grow, continue tying the canes horizontally at evenly spaced intervals.
- Positioning climbing roses horizontally encourages the growth of side shoots, or laterals, that extend from the main canes. This allows the plant to produce more flowers.[3]
- Prune your roses each spring. Once your rose plant is about 3 years old, you’ll need to start pruning off old canes to promote growth. Each spring, after the first main flush of blooms, remove the ties on the old, gray, woody-looking canes and cut them off at the base with pruning shears. This is healthy for your plant because it helps to improve airflow and direct future growth.[4]
- In addition to removing dead, damaged, and diseased canes, you may also need to remove canes that cross and suckers that grow from below the graft union.[5]
- Don’t prune your plant at all during its first 3 years of life.
- Train the remaining healthy canes. After removing all of the unhealthy canes, you should ideally have about 3 or 4 of the healthiest canes left. Once you’ve done this annual pruning, tie the remaining canes to the support loosely with strips of pantyhose. As the canes grow, continue tying them to the support horizontally at evenly spaced intervals.[6]
EditInstalling a New Support and Rose Plan
- Decide on a location that’s sunny, sheltered, and has good drainage. Roses grow best when they’re exposed to 6 hours of sun daily and are protected from harsh elements, such as wind. They also need to be planted in soil that drains well, or else rotting may occur. Choose a location in your yard to install your support that meets these needs.[7]
- Select a support. Choose a trellis or other similar structure that your roses can climb on. The support must be large enough and sturdy enough to hold the climbing rose in wet and windy conditions at its mature height. Choose a support that encourages horizontal growth, such as a fence, over a support that allows vertical growth, such as a rose tower. Also, consider ease of access for pruning.[8]
- A smaller climbing rose will do fine with a support that’s tall.
- A larger climber will require a large arbor, pergola, or other sturdy structure.
- Once a climbing rose is established, you won't be able to replace the support without severely damaging the plant. Try to purchase or build a support that will last for several decades.
- Install your support. Once you’ve decided on a support and a location, it’s important that you secure your support to the ground. Anchor the base of the support with stakes to enhance its stability. If you’re leaning your support against a wall, be sure to place the base at least away from the wall to allow proper airflow, and so that you’ll be able to access the plant when doing necessary maintenance.[9]
- Dig a hole that’s deep. Use measuring tape to measure away from the base of your support. Use a shovel to dig a hole that’s deep and twice as wide as the plant’s root spread. This is where you’ll plant your roses.[10]
- Position the graft union below the soil line in cold climates. If you’re planting in an area that has a cold winter climate, put the plant in the hole and position the graft union of the plant, or the bulge where the top and bottom of the plant meet, about below the soil level. Then, fill in the rest of the hole with soil. This should help to protect the plant from frost.[11]
- Place the graft union above the soil line in warm climates. If you’re planting in an area that has a warmer climate, there’s little risk of frost damage. Because of this, you can plant your rose plant with the bulging graft union slightly exposed. Fill your hole with some soil and place the plant in the hole so that the graft union is positioned just above the soil level.[12]
- Add mulch to the surface. Spread wood chips or cocoa bean hulls around the base of the rose plant, but be careful not to heap the mulch around the plant’s trunk.[13] This should help the plant to retain water and also protect it from weeds.
- Water the root zone heavily twice a week. Roses respond much better to less frequent soakings than frequent sprinklings. Soak the soil around the base of your rose plant with water at least twice a week during the warm summer months and at most twice a week during the rest of the year.[14]
- While roses love water, they may die if they sit in it. Remember that good drainage is crucial for growth.
- Wrap your support in burlap during the winter. Your roses will be at risk throughout the winter if you don’t do anything to protect them from the cold weather. To ensure that your roses have the best chance at staying alive and healthy, wrap the plant and the support in burlap and stuff the inside with straw.[15]
EditVideo
EditThings You'll Need
- Support
- Pantyhose strips (or other stretchy material)
- Measuring tape
- Pruning shears
- Stakes
- Shovel
- Mulch
- Water
- Burlap
- Straw
EditSources and Citations
Cite error: <ref>
tags exist, but no <references/>
tag was found
No comments:
Post a Comment