Saturday, December 2, 2017

How to Decorate Wine Bottles

Instead of recycling your empty wine bottles, you can reuse them by turning them into beautiful decorations for your home. You can easily decorate your wine bottles with supplies like paint, glitter, and string lights. However you decide to decorate your bottles, completely empty them of wine and rinse them out before you get started. Make sure you have a spot to display your works of art when you're finished with them!

EditSteps

EditPainting Wine Bottles

  1. Get acrylic paints. Acrylic paints will stick to glass, so you won't have to worry about paint coming off your wine bottles. Get paints in multiple colors if you want to paint a more intricate design.[1]
    Decorate Wine Bottles Step 1.jpg
  2. Clean your wine bottles with soap and water. Soak a section of a rag in soapy water and wipe down the outside of the bottles. Rinse the inside of the bottles out to remove any leftover residue. Let the bottles dry completely after you clean them.[2]
    Decorate Wine Bottles Step 2.jpg
  3. Put tape on the bottles if you want a striped design. Use painter’s tape or masking tape. The spots you cover with tape won’t get paint on them, so they'll look like empty stripes when you remove the tape after painting.[3]
    Decorate Wine Bottles Step 3.jpg
    • Wrap a piece of tape around the base of the bottle to create a thick stripe going around the whole bottle.
    • Run a piece of tape from the bottom of the bottle up to the mouthpiece to make a vertical stripe.
  4. Paint your wine bottles with a paint brush. If you’re doing one solid color, use a large paint brush to work faster. If you’re painting multiple colors on a single bottle, use a smaller paint brush so you can be more precise. Don’t forget to paint the bottom of the bottle and the rim around the mouthpiece.[4]
    Decorate Wine Bottles Step 4.jpg
    • You don't have to paint your wine bottles a solid color. Pick designs or patterns you like and paint those on the bottles instead.
  5. Let your painted wine bottles dry overnight. After they've dried overnight, touch them with your finger to see if they're fully dry. If they're still wet, let them continue to dry before you cure them.
    Decorate Wine Bottles Step 5.jpg
  6. Cure your wine bottles in the oven for 30 minutes. Place your wine bottles in the oven and set the temperature to . Set a timer for 30 minutes, then remove the bottles from the oven.[5]
    Decorate Wine Bottles Step 6.jpg
  7. Add decorations to your painted wine bottles. Glue on rhinestones or decorative gems. Add glitter to your painted bottles using an acrylic sealer as an adhesive. You can also hot glue decorative flowers onto the bottles.
    Decorate Wine Bottles Step 7.jpg
    • Make sure you wait to add decorations after you've cured your wine bottles in the oven.

EditMaking Wine Bottle Lights

  1. Drill a hole at the base of your wine bottle. Use a diamond drill bit designed specifically for glass. Make sure the drill bit is larger than the cord on the string lights you’ll be using. Lay your wine bottle on a flat surface over a towel so it’s steady. Slowly drill down into the base of the wine bottle (on the side, not the bottom of the bottle). As you’re drilling, spray water from a spray bottle onto the drill bit to lubricate it.[6]
    Decorate Wine Bottles Step 8.jpg
    • Ask someone to help you with this part. One of you can drill the hole while the other sprays the drill bit with water.
  2. Remove the piece of glass you drilled out and rinse the bottle with water. Rinse directly over the hole you drilled to wash away any small pieces of glass around the hole. Let the bottle dry completely.[7]
    Decorate Wine Bottles Step 9.jpg
  3. Feed the string lights through the hole in the bottle. Make sure you use string lights that have a plug on only one side or they won’t fit through the hole. Slide the end without a plug through the hole and keep feeding the cord through until all the lights are inside the bottle.[8]
    Decorate Wine Bottles Step 10.jpg
  4. Use a bent coat hanger to pull some of the lights up the neck of the bottle. Bend a metal coat hanger so there’s a hook at the end. Slide the hook down through the neck of the bottle and use it to grab part of the string lights. Carefully pull the lights up through the neck of the bottle. Stop once the lights reach the mouthpiece and unhook the coat hanger from the cord.[9]
    Decorate Wine Bottles Step 11.jpg
    • Pull up 2 or 3 sections of the lights so they are firmly packed in the neck of the bottle. This will prevent them from sliding back down into the base.

EditDecorating Wine Bottles with Glitter

  1. Scratch up the surface of your wine bottle with fine-grit sandpaper. Look for sandpaper with a grade between 120 and 220. Rub the sandpaper over the wine bottle in a circular motion until it’s completely covered with scratches. The scratches will make it easier for the adhesive you’re going to use to stick to the bottle.[10]
    Decorate Wine Bottles Step 12.jpg
  2. Set up your work space in a well-ventilated area. Work outside if possible. If you have to work inside, open any windows in the room you’ll be working in and plug in a box fan. Lay down tarp or newspaper on a flat surface so glitter and adhesive don't get everywhere. Lay your wine bottle down on the flat surface.[11]
    Decorate Wine Bottles Step 13.jpg
  3. Spray a section of the bottle with a spray-on acrylic sealer. The acrylic sealer will work as an adhesive for the glitter to stick to. Hold the sealer away from the bottle and spray from the base of the bottle to the mouthpiece.[12]
    Decorate Wine Bottles Step 14.jpg
    • You can find spray-on acrylic sealer at your local crafts store.
  4. Sprinkle craft glitter over the sealer. Add the glitter directly from the canister. Completely cover the adhesive with glitter so there aren’t any empty spots.[13]
    Decorate Wine Bottles Step 15.jpg
    • Look for craft glitter at your local crafts store.
  5. Turn the bottle and apply sealer and glitter to a new section. Continue to turn the bottle and add more sealer and glitter until the entire bottle is covered. If you notice bare spots, spray sealer over them and cover them with glitter.[14]
    Decorate Wine Bottles Step 16.jpg
  6. Spray the whole bottle with sealer to seal the glitter in place. The extra coat of acrylic sealer will help the glitter stay on the bottle. Keep in mind that some glitter will come off the bottle when you touch it. Be careful when you're handling the bottle so glitter doesn't get on your clothes.[15]
    Decorate Wine Bottles Step 17.jpg

EditWrapping Wine Bottles with Twine

  1. Glue the end of a roll of coarse twine to the bottom rim of your wine bottle. Use a hot glue gun so the twine is secure on the bottle. Apply a drop of hot glue to the bottom rim of the bottle (on the side of the bottle) and press the end of the twine into the glue. Let the glue dry for at least 1 minute.[16]
    Decorate Wine Bottles Step 18.jpg
  2. Wrap the twine around the bottom rim of the bottle. Add a drop of hot glue every . Stop wrapping the twine once you get back to where you started. Let the hot glue dry for 1 minute.[17]
    Decorate Wine Bottles Step 19.jpg
  3. Tightly wrap the twine around and up the bottle until you reach the neck. Don't leave any gaps between the rings of twine as you wrap it around. You shouldn't be able to see the glass wine bottle through the twine. Don't apply any hot glue to the rings of twine going up the base of the bottle.[18]
    Decorate Wine Bottles Step 20.jpg
  4. Wrap the twine around the base of the neck of the bottle and apply hot glue. Add hot glue every like you did to the ring of twine at the bottom rim of the bottle. Stop once you reach the point where you first started wrapping the twine around the neck of the bottle. Wait 1 minute for the hot glue to dry before continuing.[19]
    Decorate Wine Bottles Step 21.jpg
  5. Tightly wrap the twine around and up the neck of the bottle. Layer the rings right on top of each other so there aren't any gaps, like you did with the twine on the base of the bottle. Stop wrapping when you reach the lip at the top of the neck.[20]
    Decorate Wine Bottles Step 22.jpg
  6. Cut the twine from the roll with scissors and glue the end to the bottle. Apply a dot of hot glue right below the lip at the top of the bottle. Press the end of the twine into the hot glue. Once the hot glue dries, your bottle is ready to be displayed![21]
    Decorate Wine Bottles Step 23.jpg

EditThings You’ll Need

EditPainting Wine Bottles

  • Latex-based paint
  • Rag
  • Tape
  • Paint brush
  • Oven

EditMaking Wine Bottle Lights

  • Drill
  • Diamond drill bit
  • String lights
  • Metal coat hanger

EditDecorating Wine Bottles

  • Fine-grit sandpaper
  • Spray-on acrylic sealer
  • Craft glitter

EditWrapping Wine Bottles with Twine

  • Coarse twine
  • Hot glue gun
  • Scissors

EditSources and Citations


Cite error: <ref> tags exist, but no <references/> tag was found




No comments:

Post a Comment